&

26
2024-08

壓力傳感器的輸出靈敏度是指傳感器輸出信號的變化量與引起該變化的壓力輸入量之間的比例關系。簡單來說，它描述了傳感器對壓力變化的響應程度。通常情況下，靈敏度以特定單位表示，比如毫伏每伏每帕斯卡或者是更常見的毫伏每伏每千伏。這里，"V"指的是施加于傳感器上的激勵電壓，“kPa”則是壓力單位千帕斯卡。 ……

Check the details >>

24
2024-08

傳感器常見的性能評價指標

傳感器常見的性能評價指標可以分為靜態指標和動態指標兩類。其中，靜態指標主要考核被測量在穩定狀態下傳感器的性能，包括分辨率、靈敏度、線性度、重復性、遲滯、穩定性等。一，分辨率：傳感器能夠檢測到的最小輸入變化量，即只有輸入變化量超過一定閾值時，傳感器的輸出量才會產生變化。分辨率越小，說明傳感器對被測量的分辨能力越強……

Check the details >>

25
2019-11

Application of sensor in Mechanical Engineering

The function of the sensor is to transfer various non-electric quantity into the device of electric quantity output according to the law, so as to facilitate the analysis and processing of it and adjust the working state of the controlled device. Most adv

Check the details >>

25
2019-11

Composition and classification of sensors

A sensor, also called a transducer, detector or detector, etc., refers to a measuring device that can sense a specified measured value and convert it into an electrical quantity output according to a certain rule, usually composed of a sensitive component

Check the details >>

25
2019-11

Types and characteristics of accessories, display and control instruments of load cell

The sensor signal amplifier precisely excels the sensor output signal, and the internal voltage regulation, constant current supply bridge, voltage and current conversion are performed inside the line. The display instrument is a meter that realizes the c

Check the details >>

25
2019-11

Difference between static torque sensor and dynamic torque sensor

The static torque sensor is not much different from the dynamic torque sensor, the key is the sampling speed of the secondary instrument. Dynamic torque sensors are typically used to test for sudden changes in torque. Torque or torque peaks such as

Check the details >>